Select your region:
Wall Formwork
StarTec XT
Flexible multi-purpose formwork with the combination tie hole
The new generation of wall formwork systems
Every construction site is unique, and the formwork requirements vary from project to project. StarTec XT is a real all-rounder for universal use in commercial and residential construction, ensuring that you remain flexible and well equipped for every task.
Thanks to the integrated combination tie hole recessed in the frame, you can select between three tying methods with a flick of the wrist. No additional parts need to be installed for single-sided tying, saving you time. Simplifying the choice of tying method best suited to the project significantly reduces the formwork placing time. The flush integrated combination tie hole also enables the panels to be stacked without having to remove parts beforehand.
StarTec XT is fully compatible with StarTec and the lightweight, crane-independent AluStar.
Got a specific enquiry about StarTec XT?
Why not call our team on +44 1827 60217
One system: three tying methods
Size
- Forming area up to 8.91m² per panel (330 x 270cm)
- Panel heights 330, 270 and 135cm and only eight panel widths for trouble-free corner solutions for all wall thicknesses
Performance
- Permissible fresh-concrete pressure load (as per DIN 18218) of 60kN/m² (DIN 18202, Table 3, line 6)
Closed steel profile
- Structurally robust
- Torsionally rigid
- Hot-dip galvanised for easy cleaning and reduced concrete adhesion
Clever multi-function profile
- Multi-function profile made of closed steel profile with welded-in DW 15 nuts for quick and secure attachment of accessories with only one a single part – the flange screw
Combination tie hole integrated into the frame with its rotating sphere for three tying methods in one system
- No assembly time for additional parts and accessories
- No loose parts
- Simple handling
Initial and final formwork identical
Sophisticated MEVA product design
- MEVA assembly lock to produce non-positive connections with just a few hammer blows
- Bump notches for panel widths of 135cm and greater for simple alignment and adjustment with a crowbar
- High-quality alkus all-plastic facing with seven-year long time warranty
Complete compatibility with StarTec and AluStar
Flexible, universal formwork solution
StarTec is a versatile crane-independent aluminium wall framework system that works in harmony with the AluStar and StarTec XT wall framework systems. All systems can be combined without the need for adapters. StarTec is ideal for:
- universal applications
- residential and commercial developments.
Single sided tying – method 1
With XT taper tie 23
Single sided tying – method 2
With XT tie rod DW 20 and plastic tube
Two sided tying – method 3
With tie rod DW 20 and plastic tube
For more detailed technical information please refer to the download tab which contains PDF information about this product.
Flexibility guaranteed
The StarTec XT panel dimensions and symmetrical internal tie holes result in a uniform tie hole and joint pattern for the highest architectural-concrete requirements. This applies to vertical, horizontal or a combination of vertical and horizontal formwork. With the panel heights 330cm, 270cm and 135cm as well as panel widths from 270cm to 30cm, StarTec XT enables quick adaptation to the geometry of the building. Thanks to the range of panels, all common wall thickness can be formed without filler areas.
| Technical information | |
|---|---|
| Performance | Permissible fresh concrete pressure (to DIN 18218) over entire surface of 60kN/m² (DIN 18202, Tab. 3, Line 6). |
| Materials | Steel. Structurally robust. Torsion-proof. |
| Heights | 330cm, 270cm, 135cm. |
| Widths | 330cm, 270cm, 240cm, 135cm, 90cm, 60cm, 49cm, 45cm, 30cm. |
| Largest Panel Size | Up to 8.91m² contact area per panel (330 x 270cm). |
| Profile | 40mm, closed steel profile. High stability and durability. |
| Protective coating | Hot-dip galvanised, surface post-treatment. Easy cleaning and reduced concrete adhesion. |
| Crane Independent | No. Requires crane assistance. |
| Tying System | Combination tie hole integrated into the frame with its rotating sphere for three tying methods in one system. |
| Connections | Panels: AS assembly lock. Stepless, friction-locked with just a few hammer blows. |
| Orientation | Symmetrical panels. Can be used horizontally and vertically. |
| Components | Inside Corner, Outside Corner, Hinged Inside Corner, Hinged Outside Corner, Stripping Corner, Fillers. |
| Corners | Available panel dimensions allow for trouble-free corner solutions with any wall thickness. |
| Facings | High-quality alkus all-plastic facing with 7-year warranty |
| Compatibility | Startec XT, AluStar. |
| Safety | |
|---|---|
| SecuritBasic System | Includes platforms, access ladders, safety cages, front railings, brace frames and side railings in one system. |
Tie rod fixture
Can be attached to the multi-function profile of the vertical or horizontal StarTec XT panel – for safe and rapid transport on the construction site.
Ease of installation
XT tie rods can be installed and removed safely using a spanner.
MEVA multi-stop 23
The watertight internal seal for flush, single-sided use in formwork tie holes when using XT taper ties 23. It seals against hydrostatic pressure and is resistant against chemicals.
MEVA provides a wide range of downloads. Here you will find product information, instruction manuals and much more.
For some downloads we may ask you for your email address so we can send your download to your chosen email address. For your convenience these downloads relate directly to this product. You can also find a full range of pdf downloads here..
Related products and accessories
All MEVA systems are designed to be compatible, saving you time and money. We think you might find these products useful.
Meva FormSet
MEVA’s system-independent accessories include smart solutions like quick anchors, stop-end systems and security systems as well as reusable box-out corners to make your next construction project as easy as possible.
Mammut XT
A heavy-duty formwork has the ability to accommodate fresh concrete pressures of up to 100 kN/m² over the entire surface.
StarTec
The universal steel formwork that is capable of accommodating fresh concrete pressures of 60 kN/m² is a genuine all-rounder.
Mammut 350
Mammut, large-scale formwork system. Panelised formwork system. A whole new dimension in formwork efficiency.
STB/SK
STB/SK offers the ideal solution for single sided tying formwork. STB and SK are robust wall braces with great flexibility and can be fitted horizontally or vertically.
Triplex
Triplex is the modular, heavy-duty bracing system for high wall and column formwork. It can also be used flexibly for additional horizontal and vertical support applications.
Our Projects
Examples of projects in your region and around the world
Let our team help you select the right product.
Talk to one of our MEVA formwork specialists, we can help you with all your formwork needs from the ground up. Let us help with your next formwork project.
Joe Ward
Sales Business Development Manager
UK & Ireland
9 Ninian Pk, Ninian Wy., Wilnecote, Tamworth B77 5ES, United Kingdom
Subscribe to the MEVA newsletter
MEVA news, worldwide projects and tips & tricks from formwork professionals, digitally and directly to your inbox.
